**Video Poker, Keno, Slots, 21** Gaming machines > Aristocrat Video Gaming Machines

Aristocrat MK-6 no lockups. BV Cycles but Red lights- SOLVED

(1/2) > >>

slotmachineparts:
All games came from a casino. Were on the floor. Only 6 months old. The casino bought them refurbished from Aristocrat.
Was able to clear the errors, however  now I can't get the machine to accept bills. I have no current lockups. I have switched bill validators a couple times still no success. The BV do cycle, however, just show up with red lights.

JCM UBA 10 V2.07-25

Set Chips Used:
06.03.20-U3 Series 01 M27v800 MK6USA 13D163A0
&
06.03.20-U2 SERIES 01 M27v800 MK6USA 3CF90UD9

SYSTEM BASE:
01.04.16-u70 SERIES 01 M27V160 E804C710
&
01.04.16-U83 SERIES 01 M27V160 MK6USA 4A13D11B

BettorSlots:
Take a look in the top box and see if the player tracking board is still plugged in.  Just disconnect any of the harnesses that are plugged into it.  After that do a clear and set it up again.  I had the same issue on a couple that I shopped and that fixed the problem.

slotmachineparts:
I appreciate the response. I just tried that. Have the same issue. BV Light is still RED.

BettorSlots:
Check comm wires leading from BV hub to back plane for damage.  Is this a known working BV...do you have another one to try? 

slotmachineparts:
Everything looks good. BV Cycles, did test in bv and accepts bill. Can not test in diagnostic, however.

Navigation

[0] Message Index

[#] Next page