| **Video Poker, Keno, Slots, 21** Gaming machines > BALLY Game Maker |
| Gamemaker Won't Clear |
| (1/1) |
| Tacman:
Have a 7200 with 24 Mains and 14 Graphics. Go to clear it and it does the initial clear, after setting the first page of options, get the message to Remove Clear Chip, Replace Game Chip, and Restart Machine. After those things are done and machine is powered back on, get the message "Main Saferam Signature Corrupted. Perform Saferam Clear." Things tried: -Swapped Mains and Graphics chips (tried multiple sets and combos) -Different Clear Chips (512kb, 1mg, even an EVO clear) Any ideas what could be the culprit? « Reply #1 on: 16-06-2013, 19:12:23 » Have you tried just #8 on dip switch as its for saferam clear. May not work. Worth a try. How about diff clear chip from diff file, etc. Richard « Reply #3 on: 25-11-2013, 18:17:36 » If you are still having the problem, get a DEBUG chip and do the clear with it, it seems to dig a little deeper than the clear chips. I had a similar issue where the clear chip would not let me change a few settings, did the clear with the debug chip and all is well! Good Luck! |
| Navigation |
| Message Index |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |