New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: danatlvc on March 27, 2016, 11:30:22 AM
-
I have a 15" LCD V7200 machine. I was changing some games on it & by accident left the clear chip on the board. It was sitting on the plug wires going into the board pin side down unfortunately. The machine works great still except no touchscreen & I've tried the other boards that I have for it with other games with the same result. My question is it the backplane or the tiny touchscreen board inside the Ceronix monitor? I've been looking for a backplane for a V7200 with no luck so far. All found are the older ones with the 15 pin plug on the right and I need it on the left for my harness setup. Any help or suggestions would be appreciated
Thanks,
Dan