New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: puckhead on April 09, 2016, 02:19:25 PM
-
i want to be clear on this before i try it. this is from the FAQ:
--------------
This is how you wire up an S2000 and eliminate the door optics forever. The green and black wires on the door optic harness needs to be lengthened to come back toward the hinges, under the reel tray over to the 3-way cherry switch that's located on top of the DBV. 1). Once you do that, splice the green wire from the door to the purple wire on the cabinet side optic harness. 2). Attach a tab on the red wire from the door harness to the 3rd tab on the cherry switch. 3). Finally, attach a tab onto the green wire from the cabinet-side optic harness and put that on the left-most tab position on the cherry switch. You will notice the cabinet light also works off of the cherry switch but occupies the 4th & 6th right-most tabs.
it says lengthen the green and black wires , but the pic with the FAQ shows no black wire, only red green and purple, so im not sure what to cut. also,do you leave the optic sensor and transmitter plugged in? the cherry switch should be closed between the green and red wire when the door is closed? i'll attach the pdf with the pics im referring to.
thanks much
mike
-
I am shoe that that way will work but I think it is a little over complicated. All you really need to do is connect the red wire from the door optic to the green wire that goes to the cabinet optic (threw the cherry switch). The only reason you would need to connect the other wires is if you need the belly door switch to work. So it's really just red to green.