New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 429CV23 on April 02, 2017, 01:00:57 PM
-
Hey all
I received a "new" reel and now the machine works; thanks to all who gave advice!!! :applause:
It has no sound though. I assume the amp board is in the top cabinet, upper right side. I verified it is getting 13+V via the red & black wires at the bottom harness connector.
I'm wondering about the J2 connector, top left on card; nothing connected there. All other connectors are populated. I removed & reseated the connectors with no change.
Board is part #76928001 Rev A
Code 1004245
Date 617
If a harness should be connected to J2, where does it originate?
Thanks!!
-
Nothing connects to J2. You have the volume settings up on the machines controls correct. I have seen where some casinos have actually unplugged the speakers, have you checked the plugs to the speakers themselves? Post a picture of the installed amplifier board.
-
Are you sure the volume level is not set at 0?
-
I have the game volume at 8.
-
(https://newlifegames.com/nlg/proxy.php?request=http%3A%2F%2Frs48.pbsrc.com%2Falbums%2Ff210%2F429cv23%2Ftmp_5771-20170402_0816321630632812_zpsewiyfvlp.jpg%3Fw%3D480%26amp%3Bh%3D480%26amp%3Bfit%3Dclip&hash=9434c43ec44ead9a01affb319c1dbc97a8dab0f2)
-
Speakers disconnected? Amps do go bad but want to rule out easy stuff. Nothing from the speakers, no hum, buzz, or any noise at all?
-
No sound at all.
-
And the harness isn't loose at the coupling between top box and base or at the motherboard?
You might also unplug one speaker at a time to see if you have a bad one dragging the amp down
-
I have had a no sound issue & intermittent sound issue caused by the mpu board. Hope that is not your case. Is this a 502/504 mpu or a 1270? If it's the 1270 (enhanced) mpu, does it have the DSP chip installed? It is mandatory. I have had one bad one but that's very rare. I have some amp boards if you want to try one. You can swap one from another machine if you have one just to verify or rule that out.
-
I have the enhanced MPU, and there is no DSP chip. Where can one be sourced?
Also, would I need the 2 or 6 DSP? Game is Double Triple Butterfly Sevens, 5-reel.
Thanks!
-
Nice call RB you beat me to it. I was checking one of the previous post where he stated he had a 1270 board. Must have DSP chip. I'm sure RB can help you out.
Rich
-
Yes I have a DSP (digital sound processing) chip. PM sent.
-
I know a SIMM won't work without a DSPL chip installed, but didn't know 1270's couldn't use or didn't have generic sound files
-
Problem solved!!! Thanks all! It now works and sounds great!!
-
Was it the DSPL chip?
-
Yes
Amp was fine. Without the DSP chip the 1270 MPU has no sound.