New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: ianmcneil68 on August 13, 2017, 12:44:07 PM

Title: Vision and multi-denom
Post by: ianmcneil68 on August 13, 2017, 12:44:07 PM

Is it possible to run Vision with muti-denom? If so, what is the chip combination. I have one Vision machine that has all of the hardware for multi-denom, I just don't, or haven't attempted, to use it. I know GX0 and 248's will run any Vision and I run those in all of mine. I wouldn't mind running multi-denom though. Any info would be appreciated.
Thanks, Ian.

Title: Re: Vision and multi-denom
Post by: idesign on August 13, 2017, 02:04:18 PM

It's been awhile but as I recall GX0 is single demon, GX1 is multi.  Also, depends on the game too,  some support multi, some not.  PAR sheet for the game would give a clue on that I would think.

Title: Re: Vision and multi-denom
Post by: RB on August 13, 2017, 02:14:08 PM

SG380s support multi denom but require ATA10065 or newer. The PSR is available in the files section.

Title: Re: Vision and multi-denom
Post by: idesign on August 13, 2017, 02:38:25 PM

Just looked at the PSR for 248, not Multi denom compatible, must use 380.

Title: Re: Vision and multi-denom
Post by: ianmcneil68 on August 13, 2017, 03:34:59 PM

I know GX1 and 380's are the norm for multi. I seem to recall trying to use 380's in that machine before and had trouble. I just wasn't sure if there was any other combo that would work for vision. The game is MSLGM 5 line.

Title: Re: Vision and multi-denom
Post by: ianmcneil68 on August 13, 2017, 03:40:41 PM

Sorry, SB000421. Running ATA65 in the top box.

Title: Re: Vision and multi-denom
Post by: RB on August 13, 2017, 06:06:16 PM

380s & 11GX1 should work. Might have to clear it & definitely have to key it to set up multi denom.

Title: Re: Vision and multi-denom
Post by: ianmcneil68 on August 13, 2017, 06:11:30 PM

 I'll give a shot.