New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: br549autosales on September 06, 2017, 03:04:08 PM

Title: Error: Time to exit optics too short
Post by: br549autosales on September 06, 2017, 03:04:08 PM

Anyone know what this means and how can I fix this? Thanks

Title: Re: Error: Time to exit optics too short
Post by: therockinelvis on September 06, 2017, 05:05:44 PM

A new one to me. What was it doing before that message? Will opening and closing the door clear it? I can't wait to see where this leads to.

Title: Re: Error: Time to exit optics too short
Post by: cowboygames on September 06, 2017, 05:18:02 PM

I haven't ever heard of it either, but would suspect an SAS message. Maybe check those settings in menu 7

Title: Re: Error: Time to exit optics too short
Post by: br549autosales on September 06, 2017, 05:44:52 PM

Ok Cowboy, what would I look for to change in those settings?

Title: Re: Error: Time to exit optics too short
Post by: cowboygames on September 06, 2017, 08:29:03 PM

I believe it should be set to STANDARD.
I f that doesn't work, try a clear chip...

Title: Re: Error: Time to exit optics too short
Post by: br549autosales on September 06, 2017, 10:34:38 PM

Thank you sir, I will try that

Title: Re: Error: Time to exit optics too short
Post by: cowboygames on September 06, 2017, 10:49:12 PM

Almost 10 years on here and I've never heard of that error becore, but checking SAS settings is easy and a clear isn't a whole lot more difficult. I'll be interested to know if it ends up being a settings issue. Good luck

Title: Re: Error: Time to exit optics too short
Post by: RB on September 07, 2017, 06:20:10 AM

That's a new one to me too but a clear should reset the SAS to default settings.

Title: Re: Error: Time to exit optics too short
Post by: Stayouttadabunker on November 22, 2020, 03:15:21 PM

David, are you ever going to tell us?  :rotfl: