New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Cashen87 on November 07, 2017, 07:13:40 AM

Title: Are this a S or S+ IGT slot machine?
Post by: Cashen87 on November 07, 2017, 07:13:40 AM
I wondering what type IGT slot machine this is S or S+?
Title: Re: Are this a S or S+ IGT slot machine?
Post by: Jim on November 07, 2017, 07:18:58 AM
I would think its an S+,  most "S" models had the display on the right side,  plus there was an opening for a bill unit, "S" models did not have a bill unit.

Jim
Title: Re: Are this a S or S+ IGT slot machine?
Post by: Sunrise Side on November 07, 2017, 07:19:39 AM
Looks to be S+. But to be sure , can you post a pic of inside of the lower cabinet to view the MPU?
Title: Re: Are this a S or S+ IGT slot machine?
Post by: Sunrise Side on November 07, 2017, 07:22:09 AM
I didn't  pick up on the BV. Pic little dark.
Title: Re: Are this a S or S+ IGT slot machine?
Post by: Cashen87 on November 07, 2017, 07:45:22 AM
 This IGT machine was made in Des 04 1994.
Title: Re: Are this a S or S+ IGT slot machine?
Post by: Ken on November 07, 2017, 09:13:35 AM
This IGT machine was made in Des 04 1994.

It is a S+ missing the internal BV. Can be played as coin only.
Title: Re: Are this a S or S+ IGT slot machine?
Post by: rokgpsman on November 07, 2017, 09:47:37 AM
I wondering what type IGT slot machine this is S or S+?

Cashen87 - Here's the easy way I've learned to identify these IGT machines. You only have to look at the mpu board. I think this method to ID the machine holds up in all cases.

All of these IGT machines have a main circuit board called the "mpu". It is located in the lower part of the machine.

If the mpu board has 2 large elec connectors (with many wires) connected to the top edge of it then it is a model S (not an S+). To remove the mpu you would have to disconnect these connectors.

If the mpu does not have those 2 large wiring connectors but instead it is plugged into another circuit board below it (the motherboard) then it is an S+ machine. To remove the mpu you simply pull upward and it will disconnect from the motherboard. You don't have to remove any wiring connectors.
SimplePortal 2.3.5 © 2008-2012, SimplePortal