New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: schnuffbert on November 07, 2017, 11:48:43 PM
-
Hi there,
I have a Problem with my Bally gamemaker. Both acceptors don‘t work and the Lights from them are out. Acually the machine has Jurisdiktion 1 - Thats wrong cause in Europe it Must be 5, But the machine is booting normaly and the Games came up...
So the Reason for the acceptor Problems could be the wrong jurisdiction ??
Cheers and Thanks from Germany
Peter
-
Is it in DEMO mode?
Was it working before?
Did you install a new battery?
Here's the typical settings but this, of course, depends on your bill validator type, coin comp type, etc - so, change those accordingly. I'm assuming since it worked, the machine is set for your currency type or for tokens.
There's some Game Maker experts here and if this doesn't resolve the issue, I'll message them ASAP.
Jurisdiction – ONE
SAS – 2.83
Chassis Type – UPRIGHT
Coin Acceptor – COIN ACCEPTOR
Bill Acceptor – JCM DBV
Hopper – COIN
Door Type – MECHANICAL
Double Down – ON
Tournament – ON
Primary Host – NONE
Secondary Host – NONE
EFT – DISABLE
Secondary Device – NONE
Typical settings for a V7200 model are as follows:
Jurisdiction – ONE
Primary Host – NONE
Secondary Host – NONE
SAS – NONE
Chassis Type – UPRIGHT
Coin Acceptor – COIN ACCEPTOR and COD BOARD
Bill Acceptor – JCM WBA
Hopper – COIN
Door Type – PULSED OPTIC
Double Down – OFF
Tournament – OFF
EFT – DISABLE
Secondary Device - NON
Modify message
-
Problem solved - there is a NRI CC Inside - so i choosed NRI - But this was wrong.
With the Settings you told me - coins will be accepted.
Thanks A lot
Cheers
Peter
-
Glad it's working. :applause: