New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: dale on November 16, 2017, 04:05:44 PM
-
Need this small 2"X2" board that goes on the upper left cabinet wall on an AC Coin Munny Returns game.
-
Check with Ken at Ohio Gaming. You can find them in our venders section on the home page. He had some AC coin machines for sale earlier this year, maybe hes selling off the parts..
-
Thought I would bump this up... still looking, somebody has got to have this old jalopies parts...... :EmoticonHelp4:
-
That's a small enough board that you might be able to have someone make one for you on a prototype board for not too much cost, especially if you have the schematic drawing for it. Going that route would depend on how difficult it is to find one.
-
Thought I would bump this up... still looking, somebody has got to have this old jalopies parts...... :EmoticonHelp4:
Did you check with Ken at Ohio gaming?
-
Talked with Chris. They tossed them...
-
Talked with Chris. They tossed them...
Yikes.. :no: I knew they didn't sell as whole games, but I didn't know this..
-
Dale. Where is that board located in the machine. Can you show a pic where it is mounted inside the machine.
-
Thanks, it is located on the left side of the wall looking in. It is only a 2"X2" board. I will post a pic of its location in a little bit.
Dale
-
Here's the pic!
Needs to be rotated left one time....
-
Help! Help! Anybody!
Dale
-
Dale, Reach out to Ken again at Ohio Gaming. Ken told me he sent you a PM and never hear back from you. They were the only place I know that possible had AC parts. If you need a contact email for Ken let me know. Just make sure to include a good pic of the board and its location with a pic.
Gary
-
I sold all the machines except one gold fish machine which is a parts machine. There is about 20 other machines and a front end loader in the way of getting to that machine.
-
Thanks Ken, LMK when you finally unbury that boat anchor, I'm sure I 'll need more parts. lol.
Dale