New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: Harvs on June 01, 2014, 06:09:50 AM

Title: Pic needed of S9 Alpha topper harness/connector
Post by: Harvs on June 01, 2014, 06:09:50 AM

I have an M9000 topper (I believe) and would like to make the proper harness that connects to an S9000. I have these 3 harnesses/wires (pictured) and if I'm not mistaken, the correct molex/harness plugs into one of the 2 (bottom front left) 10pin's in the Alpha S9 top box.


Thanks!

Title: Re: Pic needed of S9 Alpha topper harness/connector
Post by: rickhunter on June 02, 2014, 07:13:57 AM

One is for the candle. The other one powers the topper.  It is like a "Y" connector so you can plug other things if you have the topper.  I will take the topper apart tonight so you can see the other end of the harness if no one else posts it.

Title: Re: Pic needed of S9 Alpha topper harness/connector
Post by: Harvs on June 02, 2014, 08:17:26 AM

Quote from: rickhunter on June 02, 2014, 07:13:57 AM

One is for the candle. The other one powers the topper.  It is like a "Y" connector so you can plug other things if you have the topper.  I will take the topper apart tonight so you can see the other end of the harness if no one else posts it.

Awesome! Thanks Rick.


All I need now is a pic of what wires go into the molex, so I can see how to wire the molex correctly..  I am going to cut and replace the connectors to fit just like yours does..


 :1:

Title: Re: Pic needed of S9 Alpha topper harness/connector
Post by: Harvs on June 02, 2014, 03:18:36 PM

I am getting the proper OEM power supply for this topper, so hard wiring it won't be necessary now. Thanks for the pic though.


 :cool_thumb_up: