New Life Games LLC

**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: Nepa Coin Op on December 06, 2019, 05:12:53 PM

Title: BB1 With WBA JCB ???
Post by: Nepa Coin Op on December 06, 2019, 05:12:53 PM

I have a bb1 here i put together , trying to get it to work with a WBA bv but it wont accept any bills , after setup it cycled so its communicating but thats it, rejects all bills, are these bvs usable in a bb1 ??
Fully updated unit running 003 that was bench tested fine
Thanks

Title: Re: BB1 With WBA JCB ???
Post by: rickhunter on December 06, 2019, 05:21:38 PM

Make sure the jumpers are set correctly on the backplane.

Title: Re: BB1 With WBA JCB ???
Post by: Nepa Coin Op on December 06, 2019, 06:22:10 PM

I did that, kinda works when it wants
I Duno if it’s the Bv or something else I’ll have to keep swapping parts around till I get it reliable

Title: Re: BB1 With WBA JCB ???
Post by: Nepa Coin Op on December 06, 2019, 07:03:42 PM

3 diff transports 3 diff heads, after boot up itll take all the $$ ya wanna feed it, then after playing a while, run outa $$ and it wont accept, not even suck it in