New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Border01 on October 11, 2020, 12:08:31 PM
-
I have an S Plus that takes very large tokens (much larger than silver dollars). I want to change it to quarters. What do I need to convert it? Any help would be greatly appreciated
-
Post a picture of your hopper. If it's a pin wheel hopper it can be done but it will take several parts. If it is a holey wheel hopper you might as well get another hopper.
-
Ok here’s a pic
-
Ok you will need a small coin pin wheel, 25c shelf wheel, small coin knife, agitator, the deflector at the top (not mandatory it it should be there), the guide plate that goes over the knife. In addition you probably need to remove the spacer from the bowl to prevent quarters from laying flat in the wheel area. I have everything brand new except the plate over the knife.
-
Can I rob the parts from this S2000 hopper. It was a nickel one but I want quarters
-
Yes or just convert it. All you should need is the 25c shelf wheel.
-
Great news
-
Can I use this coin comparitor out of a S2000 in the S Plus. The existing one does not say what voltage it is. I don’t want to fry anything
-
Can I use this coin comparitor out of a S2000 in the S Plus. The existing one does not say what voltage it is. I don’t want to fry anything
No. Different voltage.
-
Glad I asked. Thanks. Is 24v required?
-
Yes, 24 volts AC, not DC, grey wires going to the coil on the back of the cc-16D.
I have those available if you need one!
Jim
-
Seems to be more involved than I was hoping. Can you pm a price on 2 of them. Not sure if it’s worth converting. Also with COVID restrictions I can no longer pick things up in the US, I have to have them shipped to Canada
-
James.
I have one that came out of the Bally Treasure Chests that got off of you. You can have it if you want.
Ken
-
Wow, thanks Ken. I’m not sure if it will work. Maybe someone will know?