New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: wrenchmonkey on March 30, 2014, 12:05:26 PM
-
Hi guys,
I'm not sure this is the best place to post this, but I figured people who know these machines would be the folks to ask. I'm making a machine to sort and count coins using a hopper and some coin comparators. I'm just curious if anybody can tell me if the S2000 hopper will feed pennies and/or dimes? The smallest coin I could find a hopper listed for was for nickels. Wondering if the nickel machine will feed pennies or dimes?
Any help would be appreciated.
-
It would need to have a shelf wheel and knife for the diameter and thickness of the penny and the dime. If a dime is in a quarter hopper it will jam. Same with the other denominations. If you post a WTB want to buy in classified I'm sure someone has the parts.
-
Thanks for the help. So is it safe to assume that they do indeed make the parts that would work with pennies and dimes? Like I said, all I was able to find in my browsing through ebay was nickels, so I wasn't sure they even make them for pennies or dimes. If they for sure make the parts, I'll buy the hopper for sure.
-
If you have a hopper you only need to change out the wheel.
-
You will need the shelf and pin wheel for penny and same for dime. I believe that is all you would have to change providing you already have a hopper. Should not be to hard to change out. Good luck.