**Reel Slots** Gaming Machines > IGT S and S-plus Reel Games |
Power Supply is only putting out 1/2 of what's needed |
(1/3) > >> |
Like2know:
The Power Supply in the front there is 3 fuses the bottom 2 are OK the top one is labeled 24 volts. I use the test meter at the fuse holder and I get a reading of only 12 volts is there a diagram on how to remove the power supplied? It looks pretty complicated |
buybestslots:
what game? who made it? make sure its not set on 220 volts |
Like2know:
set110v the top fuse is 24v I use my volt meter to test it and only get 12v is this normal? The other two checked out good tested exactly |
Like2know:
Power Supply testing of volts from the front at that fuses. I have three fuses holders the top one.is 24v I use a volt meter and tested it where the fuse goes. And my reading was only 11 volts. The other two fuses tested OK. Only the 24 v was only putting out 1/2 is this normal? I have a IGT S-Plus with 1048 chip, 110 v |
LINDAM:
What make? What series? what Game? Something ???? |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |