**Reel Slots** Gaming Machines > Bally Reel Games
Bally Monte Carlo stuck on code 91-0 (solved)
Haywire Slots:
Hey everyone. My MC is giving me a hard time. I installed the 2 rechargeable aaa battery holder setup on the progressive board, then programmed it using directions found on the old site, did a full clear & set everything up under 11d. Now I am stuck with the 91-0 code. Not sure what I did wrong. Any help would be greatly appreciated.
My 11d settings are as follows:
9 = 4
2 = 4
7 = 1
56 = 0
51 = 9999
58 = 1000
78lo = 1
73 = 0
61 = 1
81 = 0
Cham2 settings are as follows:
F3 = SNGL
F4 = M08
F5 = 3sec
F6 = JPO
F7 = $$$
F8 = MS00
Jackpot Programming:
Base = 250.00
Current jp = 769.25
Hidden jp = 000.00
Jp limit = 999.999.99
Increment 1 = 10.000.00
Increment 2 = 000.00
Used padded buttons to select SA mode
Haywire Slots:
I think I found the problem, the wiring seems to be wrong. I have wires running from J6 on the controller to J13 on the backplane, There is a wire connected to J14 but it is not connected to anything. I believe it is suppose to go from J7 on the controller to J13 & J14.
My question at this point is - does anyone have a wiring diagram so I can make a harness to hook this all up?
Thank you.
Haywire Slots:
Got the harness all set up, the machine is now working :D . The progressive amount is not changing as I play the game. Any Ideas?
LINDAM:
You are still lacking communication between the machine and the progressive unit. #2 in 11d menu ....some machine like 0004 and some like 0005. I have several and it's about 50/50 as to 4 or 5
stormrider:
In Bally 11d menu you need to set 78lo=1
not 79lo
91 Error comes down to this:
Bally 11d menu #2
Select 4 IF USING J14 serial return from J7
Select 5 not connecting to J14
Tim
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |