New Life Games LLC

Bill Validators, Currency Acceptors and Printers => Other Bill Validators => Topic started by: Bulldog on November 08, 2020, 01:46:06 PM

Title: WBA 11 Bill Validator not taking in any type bill.
Post by: Bulldog on November 08, 2020, 01:46:06 PM

Have an IGT PE Slant top.  The bill validator (WBA 11) Will not even start to take any type bill in.  The light is on and when started up you can hear what appears that it is starting.  Can not figure out where or how to locate the problem.  No bill jammed.   Can anyone help?  New at repairing slots.

Title: Re: WBA 11 Bill Validator not taking in any type bill.
Post by: rickhunter on November 08, 2020, 02:59:22 PM

Check to see if the bill validator is enabled in.  You should be able to enter the admin menus by musing a little white button (don't know where it is on a PE slant), and then cycle through the menus to look to see if the validator is enabled or not.  If it is not enabled, you will need a key chip to enable it.

Title: Re: WBA 11 Bill Validator not taking in any type bill.
Post by: Bulldog on November 08, 2020, 03:57:51 PM

Thanks for the info.  Will try.