**Reel Slots** Gaming Machines > IGT Reel Touch Games
I O Self Test Processor Low Battery 1 2
Tom1969:
Hi,
during the SelfTest Processor I/O there are two Battery Low mentioned…
Which one is Battery 1 an 2 and which Voltage they should have ? Is there also a possibility to check the one in the Top Box and which Voltage it should have…
Thank you already for any hint..
And Happy Eastern
Tom
qbert:
Don't think you are talking about a Reel Touch machine.
What machine do you have?
Tom1969:
Hi
yes it’s a Reel Touch…See pics
qbert:
Tom,
OK yes now I see where you are.
That is not telling you that you have a low battery.
You should only have the coin battery on the MPU it should be above 2.9V
Hopefully you have already removed the varta battery, 500 series or 1270.
Battery 2 is not for the one in the top box.
Are you having a specific problem? Is the VFD indicating a low battery? If it is you need to change the coin battery on the lower cpu.
If the top box battery goes bad and it is a bios 2 top box you will get an indication on the top box boot screen about cpu speed has changed.
Bios 1 can run with a dead top box battery.
Rich
Tom1969:
Thank you for the quick reply…
I have no issue was just scared by the self test message..
I will check my BIOS if a Battery is needed
Have a good day
Tom
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |