New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: seadoo10 on February 17, 2023, 06:00:46 PM

Title: TITO stopped working on BB2
Post by: seadoo10 on February 17, 2023, 06:00:46 PM

Hi, so I setup Lord of the rings 2 on my BB2 with the bettor slots deluxe tito board.  Worked great for about a week. Then all of a sudden it stopped taking tickets.  I tried another working TITO board from another machine.  That one wont work either.  So i swapped the boards with a working machine and they work in that one so I can assume its my machine.  Went through all the configuration settings and they are all correct.  Cleared the ram and tried again.  Still the same issue.  Then I noticed the transmit communication LED on the backplane is flashing green.  When it was working the LED light was solid green, also confirmed on another BB2 with a working TITO board.  Is it possible that the serial port on the backplane went bad?  The serial cable I used originally had a broken wire near the db9 connector.  Is it possible that may have shorted the port?  Deciding if I want to try a new backplane to see if that fixes it.  Could I possibly use the Comm 2 port for the TITO?  Any help, suggestions are greatly appreciated.

Title: Re: TITO stopped working on BB2
Post by: rickhunter on February 17, 2023, 09:15:44 PM

You can use com port 2, just make sure it is set as rs-232 with the jumpers.

Title: Re: TITO stopped working on BB2
Post by: Yoeddy1 on February 18, 2023, 01:14:56 AM

I had this happen on my game.  Changed the cable over to the COM2 port.  Now I just select COM2 during setup for TITO and it works fine.

Thanks,
Jason

Title: Re: TITO stopped working on BB2
Post by: seadoo10 on February 19, 2023, 10:59:43 PM

Switching over to comm 2 worked like a charm. Back up and running again. Thanks for the advise guys.