New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Amechanic on September 21, 2016, 07:27:10 AM
-
It's been a couple years since I had to setup a game with the 3902 board. I think I have a #40 key chip from setting up my Game King slant top. I'm now working on a 17" GK and I see other Key Chips, #17 and #22.. What the best one for what I'm doing?
Thanks, Gary
-
22 is what I use all the time, it gives the option of doing keychip functions without clearing, as 17 does not.
-
Should a 17 keychip work on all 3902 boards?
I have one that works fine on older games like Neon Nights, but I used it on Kingpin Bowling and when I reverted it back to the base chip, the game turned on as if I never installed the key chip. (There were no credits on the machine.)
Maybe I just did something wrong?
-
Should a 17 keychip work on all 3902 boards?
I have one that works fine on older games like Neon Nights, but I used it on Kingpin Bowling and when I reverted it back to the base chip, the game turned on as if I never installed the key chip. (There were no credits on the machine.)
Maybe I just did something wrong?
I like to use the 22 key chip.. I do have a 17 and only had to use it once.
-
Hi Guys, could you tell me what might be going on when I try a 22 and/or a 17 chip and upon restart I get a rainbow confetti screen?
Thanks,
Scott
-
One time when I installed the chip, a pin was sticking out, resulting in a confetti screen. Be sure that all the pins are seated!
-
like smoothgrh said check for bent/broken pin also double check the chip is not in backwards.
there was another post recently going where someone had a confetti screen it turned out to be a bad power supply. ( http://newlifegames.com/nlg/index.php?topic=18873.0 (http://newlifegames.com/nlg/index.php?topic=18873.0) )
hope its something simple for ya.
-
40 is the upgrade for 22 still same three options
-
Thanks All! But still no luck. Replaced the PS with known good PS and no change. Pins are all good. So Mark, are you saying I could also try a 40 chip on this 3902?
Scott
-
yes thats what i use
-
Thanks All! But still no luck. Replaced the PS with known good PS and no change. Pins are all good. So Mark, are you saying I could also try a 40 chip on this 3902?
Scott
Are you still having the same issue with your screen on start up? If yes did you go read the other thread where they had a power supply problem with the monitors PS, not the one for the cabinet.