New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: sakwilla on June 30, 2017, 04:44:12 AM
-
Hello all,
I am in the process of trying to set up my JCM bill validator to accept Australian Currency. I was told by the US seller that I could and he emailed me the software to use to update it but was never told how to do it.
Can someone please help me? I have included screen shots of the Bill Validator, information on the Validator and screenshots of the software I was given.
I downloaded the JCM Tool Suite Standard and tried to upload the Australian Currency but I was unsuccessful so I assume I have done something wrong.
Can anyone help me out, it would be greatly appreciated.
Its a Ballys V32 Machine (Roulette)
Cheers
-
Sorry, attached is the Validator information for the JCM Tool Suite App
-
For some reason I think 10s are chipped .. not flashed.
Pull it out and turn it over .. take a pic and post.
-
Hi mate,
Sorry this is all new to me so not sure what you mean but hoping you are talking about the validator :) Photos are below!
-
That one is flashed. My bad.
-
Is that good? Do you know what i need to do?
-
You obviously figured out how to connect the uba to the pc since you are getting the query string with the software installed. As part of the tools, there should be a firmware downloader program. You load that, and then then load the firmware file you were sent and then the flash or write button on the program I don't remember exactly what it said.
-
Thanks for your reply Rick. Do you know where the firmware downloader program is as this is all new to me?
The page is http://am-en.jcmglobal.com/files/software-tools/ (http://am-en.jcmglobal.com/files/software-tools/)
Just dont want to make any mistakes. Cheers
-
Download and use the JCM Download Program, link below
http://am-en.jcmglobal.com/wp-content/uploads/UBA_Downloader_Vista_Compatible.zip (http://am-en.jcmglobal.com/wp-content/uploads/UBA_Downloader_Vista_Compatible.zip)
-
Cheers, I downloaded the program and tried to use it but the same problem happens.
When I connect the USB from the Bill Acceptor to the laptop it makes a sound to indicate its connected. When I go to download the software onto the Bill Acceptor it makes a sound like the device is disconnected, and then seconds later it connects again (hope that makes sense)
I attached a video also to show the problem, hoping someone out there can help me with this :)
Cheers
https://www.youtube.com/watch?v=C6udr7L7QlQ&feature=youtu.be (https://www.youtube.com/watch?v=C6udr7L7QlQ&feature=youtu.be)