New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: chuck300x11 on June 30, 2017, 06:37:01 PM

Title: What do I need?
Post by: chuck300x11 on June 30, 2017, 06:37:01 PM

I have a new to me Bally alpha m9000. Right now it's running s&h green stamps on a 512mhz board. I also have a 1ghz board with 2gig ram. Here is what I have for bios, OS, and clear card:
AVBBPRORIMPU-01 bios
OS326
Clear 320
What do you recommend to be able to run games on the 1ghz board

Title: Re: What do I need?
Post by: 777sizzler on June 30, 2017, 06:44:42 PM

Chuck,  That info is on here but I can pull a winning combo that's working without shooting from my hip.  Some folks just need to read and use this site-same questions over and over and over............................. Not being rude so you know.  But the info is here for your question if you look.

Title: Re: What do I need?
Post by: chuck300x11 on June 30, 2017, 07:12:21 PM

I saw a table that lists combinations of bios, os and clear cards. The bios I have listed above is not on that table so that doesn't help. What would I need for the bios I have or should I scrap that bios and change everything to a better combination.

Title: Re: What do I need?
Post by: rickhunter on July 01, 2017, 08:15:11 AM

For the 1Ghz MPU, just go for the latest bios.  For the 1Ghz board that can accomodate 2GB of ram the bios is AVBBP26SIMPU‐07.  The OS is AVOS0000033X-XX.  Clear is 335

Title: Re: What do I need?
Post by: chuck300x11 on July 01, 2017, 12:58:16 PM

Thank you Rick.
I will post in the classified section.