New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Moag on January 26, 2018, 06:30:16 PM
-
hi new to this
Can someone help me with some settings on my ballys 6000
1. the jackpot is displayed in $ saying $1,646.97 but only pays 1500 credits I rather it say the dollar amount of the progressive in the right dollar amount
2. want to change the percent of payout
3. light on top wont stop flashing
4. have a disabled ticket printer want to get it working
someone please help that would be great thank you
-
i have the same machine,battery went dead ,i changed and used clear chips, cant get progressive to work comes up c1 c2 , the guy disconnected the belly glass open switch not sure what clips go on it i have 4 ,could you send me a picture of the belly glass switch with wire hook up. your progressive needs to be set ,as soon as i can get mine going i will help you all i can, you cant set percent pay out ,you would have to change chip for higher or lower percent on what you want 85% to 95% 6891 chip pays 89.57 back,thx
-
Hi thanks for the reply but in this time I managed to program the display and change the chips to 85% if you need help with yours leave me a message I can help
-
i do ,i think need to set up d11 settings ,i have a bally s6000 progressive blazing 7s $1 with wba 23 ss bill valitator ,replaced battery did full ram clear. bill valitator cycles turns green, then goes red,took bills when it turned green i would put them in and it would spit it out,i put the new chip for canadian polymer, it had chip for old paper canadian money, it took it a few times and gave credits then woudnt any more,those bills are hard to find ,so i got the new chip,and it will not give credits,im guessing i need to go in d11 settings and set it up, or should it work with out .i put a new cpu battery and full clear, but did not go in to 11d settings, thx
-
Hi I’m not too sure why your bill validator is not giving the credits that has something to do with the chips cuz i updated to new bills too and mine works fine and there is no settings in the 11D for the bill validator to except money and progressive c1 should mean it’s not communicating with your board I can show you a complete set up for the progressive once you have that c1 gone I will try to look up where your connections are wrong and I will get back to you in the mean time ask the guy where you got the chip for the bill validator why it isnt working he may have to burn you some a new chip
-
thx , he told me he took it out of his machine, before he send it, so it should be good ,i had the same problem with the old chip ,it took paper canadian, only had a well used $10 bill,it took it a few times then would not take it no more,so i ordered the new chip,and same thing with old $10 and newer canadian bills, i tried cleaning any lenses and wheels ,belts ,still wont take it,not sure if its the head or bill exceptor or cash box,tried it all for hours , no luck
-
Hello, can you guys help me set up my blazing 7's settings and progressive settings? I would really appreciate it. Thanks
-
sure I can help #1 do you have the proper program to change the progressive settings?
if not you cant change the dollar value that is shown..
-
Bill validator needs ID003 software for Bally.