New Life Games LLC
**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: 63mini on January 28, 2018, 04:23:38 PM
-
I know this is a long shot... Does someone have a photo or parts diagram showing the handle assembly? There is a small piece missing on the ratchet arm. I have circled the spot in the attached photo. I currently have it Jerry-Rigged with a screw and spacer. But, I was curious as to what was originally used? There is a groove in it which looks like it may have had a C-clip but, then what is the threaded hole for?
-
At least one of the members here has that same machine.. Maybe they can send you a picture of there game.. I see what looks like a cut wire to a cherry switch. Check with Alan at Klar to see if he has a manual or maybe a parts machine..
-
There should be an E clip there, see the photo of mine posted here....
Dave
-
coincard,
Awesome! That's just what I needed! :cool_thumb_up:
I notice that yours does not have the ratchet part.
-
Mine is a mess, I have not even messed with it since I brought it home except to get you the photo, I like how everything slides out for easy access, except mess in the back, I am not sure what ratchet you are talking about....
Dave
-
Never mind, I see the ratchet part in your photo, mine looks like it has been sheered off, great, more than likely going to become a parts machine unless I can find the part.... thanks for the heads up...
Dave
-
The ratchet part only makes the handle feel some what mechanical. It's not really needed for actual game play.
-
Ok, thanks for the update.... Someday I will get around to working on the thing, I like the classics, just not this one.....
Dave