New Life Games LLC
**Reel Slots** Gaming Machines => IGT Reel Touch Games => Topic started by: Border01 on May 05, 2018, 06:49:02 AM
-
The top monitor on my reel touch does not work. I have another working machine that I can swap parts with but I don’t know where to start. Any suggestions would be greatly appreciated. The monitor doesn’t appear to power up at all.
-
Start with the power supply behind the top box.
Swap that first then if that doesn't work post back here.
-
Thanks for the fast response! On initial power up the neon lights come on briefly than nothing on the screen. I’m guessing that’s a good sign. Should I still replace power supply?
-
Reseat all of the top box plugs.
I would still try the power supply.
2 screws and three plugs pretty easy.
-
Turns out it was the upper battery. Now I have this error. Not sure what to do?
Windows could not start because the following file is missing or corrupt:
\windows\system32\config\system
-
Also lower display says msverify: comm error
-
Doesn't look good for the hard drive.
Bios 1 or 2. Bios 2 starts with yellow and green Energy monitor. Bios1 starts with red white and blue finger.
-
Isn't there a setup process with a keyboard plugged in that you have to go through after changing the battery in the topbox?
-
Yes but you should not get that error message
It would say MPU speed clock not set etc.
-
Ok, thanks for clarifying
-
Turned out to be a bad hardrive.