New Life Games LLC

**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: br549autosales on June 10, 2018, 09:17:06 AM

Title: 7-segment LEDs disconnected after installing new monitor
Post by: br549autosales on June 10, 2018, 09:17:06 AM

I had a bad upper monitor on my Alpha 3 reel game & it was working just fine. After I installed a new monitor it says this message now. Anyone had this issue before & if so, how did you resolve it? Thanks

Title: Re: 7-segment LEDs disconnected after installing new monitor
Post by: br549autosales on June 10, 2018, 09:18:16 AM

Every number in the displays are flashing 8 if that info helps

Title: Re: 7-segment LEDs disconnected after installing new monitor
Post by: Amechanic on June 10, 2018, 12:05:06 PM

The one things I don’t like about Bally Alphas is that you seen to have to clear them and set them back up again after every repair or parts swap and battery change done to them..

Title: Re: 7-segment LEDs disconnected after installing new monitor
Post by: br549autosales on June 10, 2018, 12:10:05 PM

I have cleared it twice because I saw that on another post but still have the same error, unless I'm missing a step when I set the game up after a clear

Title: Re: 7-segment LEDs disconnected after installing new monitor
Post by: qbert on June 10, 2018, 12:52:01 PM

Did you try reseating the plugs going to the LED display on the door and the motherboard.
Easy enough to try a clear if that doesn't work.