New Life Games LLC

Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: mctuerk on July 02, 2014, 12:26:03 AM

Title: How to change panel size ?( progressive display only 7 dots high)
Post by: mctuerk on July 02, 2014, 12:26:03 AM

Some of my progressive displays are only 7 dots high. How to tell the controller? PSP has no option to choose between 7 oder 8 dots. Do i need a special software or a different eprom ? Connected to one of my LED5s it shows the correct high of 7dots, but i have no con1 to program the display driver. I want to use the standalone controller to drive the external 7 dots high progressive displays. But how to change the panel size?

Title: Re: How to change panel size ?( progressive display only 7 dots high)
Post by: Ron (r273) on July 02, 2014, 08:01:13 AM

Under Settings, menu=disp there is a choice of size listed as 48, 60, 64, & 70. Does this do anything
to change it?

Title: Re: How to change panel size ?( progressive display only 7 dots high)
Post by: foster on July 02, 2014, 09:20:55 AM

You have to change the font being used.
you have to do this with the configuration buttons and switch on the cham II+
pick like odtr8w or such.

Title: Re: How to change panel size ?( progressive display only 7 dots high)
Post by: qbert on July 05, 2014, 04:27:24 PM

Did the tips work for you or are you still having problems?

Title: Re: How to change panel size ?( progressive display only 7 dots high)
Post by: mike311ga on August 04, 2014, 05:38:16 AM

I have the same size display.  Goto the Display menu on the controller  by flipping the switch on the board and change the setting.  I have mine set to ODTR7 and a size of 48.