New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: 61Wally on February 04, 2023, 06:41:26 AM
-
Great Day to All. My GK(044) CRT monitor died so I took an LCD monitor from another GK(3902) machine and I changed wire harness going from P5 to monitor and this is what I get on display. Any thoughts what I did wrong? It is very dim & shifted to the right. I’ve tried factory reset and auto adjust-nothing changes. I shifted display to the 100% to the left and set brightness to 100%. I can take this monitor and put it back in the GK(3902) works great at 65% brightness and aligned perfectly.
-
Sorry, forgot other picture. This is same monitor put back in the GK(3902) machine. Thank You All for Your support.
-
Do a search for jumper needs removed on back of some 17" 19 pin ceronix monitors for 044 boards. (about an inch from vga port)
-
This post may be helpful.
https://newlifegames.com/nlg/index.php?topic=38475.msg203615#msg203615
-
I can't tell from this pics what make of monitor this is. If It's ceronix it usually can be switched to either 044 or 3902. If it's Kortek or Tovis they sometimes are specific to the platform and are not switchers.
-
I’m Sorry I didn’t put Make/Model in my message, It’s a CERONIX-1705. Once again The NLG SUPER SUPPORT STARS nailed it. I removed that little black jumper from inside monitor, turned it On, Pushed the Menu, (AUTO ASJUST) and it’s FANTASTIC, ISSUE RESOLVED.
THANK YOU ALL SO MUCH,
Dan.
-
Glad you were able to get it working! :applause: :applause:
-
:cool_thumb_up: