New Life Games LLC
Progressive Controllers and Displays => IGT Stand-alone Progressive Systems => Topic started by: SlotMachine4You on January 25, 2015, 09:05:33 PM
-
Went to install a Spectrum into an S2000 machine and was duplicating harnesses from another. Original spectrum has a 5 pinout molex and the one I'm installing has 6 pinouts.
I have spent an hour searching the old site and gleamed some information but not to the point where I feel comfortable I wont fry something out.
Does anyone have details on the 6 pin molex to netplex configuration?
Much appreciated,
Mike
-
Here's some pics of the two.
Never mind the wire colors of the 6 wire molex. Stole from another part.
Hoping someone has a solution.
Thanks,
Mike
-
Anybody?
A clear pic of both the 6 pin plug and the Netplex plug will do.
:thank_you:
:Please_Post_Pictures_2clr:
-
Maybe I need to buy a 5 pin spectrum board instead?
-
Can you post a picture of the board that the display is plugged into?
My guess is that the 6 pin plug is for an S+ machine and the 5 pin is for the S2000. I have a spectrum unit for an S2000 available.
-
Here's a pic. I was told it was for an S2000 but ????
Thanks,
Mike
-
Looks like an S+ version.