New Life Games LLC
**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: danatlvc on July 23, 2015, 07:45:31 AM
-
Howdy all,
I'm picked up my 1st Sima machine here, so Im totally green :Scratch-Head: When I turn the machine on it lights up & the bill acceptor cycles & then all 3 reels turn slowly a full turn then it says SELF TEST & then GAME LOADING & then I get HOPPER RUNAWAY error & it doesn't matter if the hopper is in or out of machine, so I assume it's not the hoppey? The hopper pinwheel was froze when I purchased the machine, it had a quarter jammed on the side of the wheel so it wouldn't move a hair. The Manual says to replace the POB or PCB on the CPU? Does anybody know what that is? The battery had leaked & needs replaced. Nice clean machine I'm hoping to get up & running. There doesn't seem to be too many people familiar with SIGMA machines. Any help or suggestions would be greatly appreciated
Thanks,
Dan
-
You do not need the battery on this board. You could remove the battery,
and on switch #2 the dip no. 7 should be turned ON so the machine will not be looking for the condition of the battery. I have a few of these boards with no battery at all.
I can email you a manual if you would like to try it.
Jim.
-
Thanks Jim that would be great
I sent you a PM with my email
I did dip 7 & it then it tells me a dip swithch has been chanegd & to turn the reset key & nothing happens when I turn it? Moved the switch back & it went away
This is a cool looking machine & I'd love to get it up & running hopefully someday
Dan
-
You do not need the battery on this board. You could remove the battery,
and on switch #2 the dip no. 7 should be turned ON so the machine will not be looking for the condition of the battery. I have a few of these boards with no battery at all.
I can email you a manual if you would like to try it.
Jim.
I wish to thank Jim for emailing me a much needed manual for these SG 300 series games. It is good to have such helpful and knowledgeable people in these forums.
-Fred-