New Life Games LLC

**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: cartman765 on September 27, 2015, 12:37:00 PM

Title: No Reel Backlights
Post by: cartman765 on September 27, 2015, 12:37:00 PM

Hi, Does anyone know what part  goes bad in the reel controller for the led backlights? I have one controller that doesn't backlight the reels if I change controllers the led's work just fine can't see anything fried on the board. Controller is for a BB2 Transmissive.  :Scratch-Head:


Thanks

Title: Re: No Reel Backlights
Post by: coolwavepic on September 29, 2015, 12:19:50 AM

I'm not sure if there is a part on the board that can be replaced or if you need an entire new Reel controller. I have seen some flickering lights on one at the casino once. Also, if you get new reel controller or fix the one you have, make sure that your fan is working on it. I did a conversion and the wires weren't powering the fan. That thing gets HOT!

Title: Re: No Reel Backlights
Post by: cartman765 on September 29, 2015, 03:11:11 AM

Hi, I've replaced surface mount components before and was wondering if anyone had repaired one. When I got the machine I made sure to blow out all of the fans in the machine and make sure they were working. So I'll just hang on to this one and buy another controller.


Thanks