Progressive Controllers and Displays > Mikohn Progressive Systems
Triple Diamond progressive meter programming
Bruce G:
Hello friends. I just revived this machine from the dead - and it's running like a champ. I'm curious about the top box message display. I'm unsure if the message can be set without an interface for the driver. There are are a couple ports on the side of the power supply / driver chassis. I'm unsure what these messages mean - and was hoping someone here could enlighten me.
Thanks!
Tilt:
The C1 error leads me to believe it's probably a Cham II+ progressive. Post a couple pics of the controller and we can tell you. Pictures have to be under 1MB to post, so you may have to resize them.
Bruce G:
Thank you for the help. I took a series of photos of the controller this evening. I didn't realize there was a memory battery on the board - and I see that this one is leaking. I need to get that thing off there tomorrow and soak the battery area with white vinegar.
knagl:
I'll defer to the experts here, but I don't think that's the stand-alone ChamII+. I believe it requires a separate controller to operate.
Sunrise Side:
knagl is correct. It's not a CHAMII+. You could install a CHAMII+ board and get that progressive display working. You would need the harness from the MB to the CHAMII+ board and the harness from that silver power supply, to the CHAMII+ board.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |