**Video Poker, Keno, Slots, 21** Gaming machines > IGT I-Game and Game King
Game King Monitor Problem
(1/1)
Tilt:
kooter
Gameking monitor problem
« on: June 28, 2006, 04:15:02 AM »
--------------------------------------------------------------------------------
Hi!
My touch screen monitor on my gameking stopped working all of a sudden. It shows the graphics but when you touch the screen nothing happen. I've tried to recalibrate . Screen message says"hold button until sound stop" but no button to hold shows up.
kooter
belbenchtech
Re: Gameking monitor problem
« Reply #1 on: June 29, 2006, 07:58:19 AM »
--------------------------------------------------------------------------------
I'm assuming your touch screen control board is a IGT P/N; 75423903...sounds like you're missing the "dot" to calibrate the touch screen, if so, change C47(10uf,50V), C48(47uf,50V), C49(47uf, 50V), C50(47uf, 50V), C51(47uf, 50V), & C52(10uf, 50V)...this will bring back the calibration "dot"...
Good luck!
Mike><>
kooter
Re: Gameking monitor problem
« Reply #2 on: July 03, 2006, 02:42:46 PM »
--------------------------------------------------------------------------------
Thanks Mike
This morning turned the machine back on and it started working. Re calibrated and the "Dot" appeared. Don't know what was wrong. Thanks for your advice.
Kooter
russ1982ny
Re: Gameking monitor problem
« Reply #3 on: July 12, 2006, 05:36:32 PM »
--------------------------------------------------------------------------------
This can also be a problem with the netplex line. Check for a loose printer cable, something like that. It's happened to me more than once.
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |