**Reel Slots** Gaming Machines > Aruze Reels Slots
Tito Aruze Innovator
GamesToPlease:
Does anyone know if Tito is compatible with Aruze Innovator machines?
Slotman:
Yes!! It took a while to get the settings right as some didnt quite make sense but it is compatible with 5.02 - 6.01 and 6.02. I currently have it working.
Stayouttadabunker:
--- Quote from: Slotman on January 11, 2022, 08:30:43 AM ---Yes!! It took a while to get the settings right as some didnt quite make sense but it is compatible with 5.02 - 6.01 and 6.02. I currently have it working.
--- End quote ---
Could you show us in detail how you've connected the TITO board to the backplane?
Thanks!
Slotman:
Sorry for the late response, I never got notification of a reply to this topic.
There is no connection to the backpane. The connection is actually the left side RS-232 port on the "brainbox". There is two. Dont use the right.
I would upload the document but when it is watermarked with my name and email address from Aruze.
pcsguymd:
--- Quote from: Slotman on February 27, 2022, 03:37:34 PM ---... The connection is actually the left side RS-232 port on the "brainbox". There is two. Dont use the right.
I would upload the document but when it is watermarked with my name and email address from Aruze.
--- End quote ---
Thanks for the information. I've also been looking for this info for quite some time, as I've been wanting to get TITO working on my Aruze machine. I've attached a pic. Is this the brainbox you're talking about, and is this the RS-232 port I should use (circled in yellow)?
I'm hoping the programming of the settings is somewhat straightforward. I've done this on my WMS Bluebird 2 machine a number of times, so I'm hoping it's somewhat similar.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |