Bill Validators, Currency Acceptors and Printers > JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators

wba 11ss to wba 13 harness

(1/1)

arnold:
Can anyone help with wiring schematic for wba 11 and wba 13.  I am trying to upgrade bill acceptor.

CVslots:
Unless I just need more coffee to de-fog my brain (which is entirely possible), I don't believe there is a harness change required. To upgrade from a 11 to a 13, you simply slide in the new 13 unit. You may have to Auto-Config NetPlex Devices (for S2000) if it doesn't recognize it. Oh, and don't swap them with the machine on (I've done it, and nothing happened, but hubby yelled at me when he seen it!)


Let us know if you have any problems...

rickhunter:
You need more coffee Roz, the harness for the WBA10/11 is different than the WBA12/13.  They are not pin compatible, so you can't "make a harness".  You will just need to buy the right harness, they are not a whole lot of money and are easy to find.  Just post a WTB in the classifieds and I'm sure you will get hits.  Also specify for what machine you need it for.

CVslots:
Thanks for clarifying Rick! Caffeine to the rescue,

Ken:
I have the harnesses for the WBA 12/13 if you are interested.

Navigation

[0] Message Index