New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: mrcrazy on November 03, 2021, 06:16:00 PM

Title: Need help Identifying Bartop Metal tray used in this PE (I think) machine!
Post by: mrcrazy on November 03, 2021, 06:16:00 PM

I attached a few pics. This is my new project I am tackling, a bartop poker machine. Repaired the ceronix monitor & now want to pop a board in it, but I cant find the right metal tray for the game board to sit on!! I have lots of parts for slots & lots of trays, but cant seem to find the right one! From looking at the mother board, it appears the board goes upside down but I still cant find the right tray. Please, can someone help or snap a few pics of theirs??

thanks in advance....

Greg

Title: Re: Need help Identifying Bartop Metal tray used in this PE (I think) machine!
Post by: knagl on November 04, 2021, 09:04:15 PM

With it having an embedded bill validator, that's going to be a PE+, not a PE.  (A lack of a bill validator can still be a PE+, but there were no PE (non-plus) machines with validators.)

I have a bartop PE+, but mine does not have the embedded bill validator, and as such I don't know that the tray is the same -- my tray is mounted vertically along the left edge of the cabinet, not horizontally.

Attached is a picture that a member on the old site posted of their PE+ MPU board from a slant top (sit-down, but not bartop) machine.  You're likely looking for something similar, if not exactly this.

Title: Re: Need help Identifying Bartop Metal tray used in this PE (I think) machine!
Post by: mrcrazy on November 05, 2021, 12:02:47 PM

Thanks!! that looks like it will fit!!! Ill keep looking, at least now I have a general idea what to look for!!

thanks for the reply & help!!

Greg