New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Phan000 on May 12, 2022, 06:26:48 AM
-
What are the dip and program settings for an s6000 with progressive, bill Val, and coin handling?
Thanks!
-
No printer or TITO? Which BV do you have? Is the progressive showing a dollar amount? If not, when you do the settings in 11d to have the machine communicate with the progressive you will get an error message that won't clear till either the progressive is working/programmed or you change the settings to no progressive.
-
Progressive settings in 11d
2= 4 or 5 or 6 you will have to try each one
7= 1
78LO= 1
Coin handling
54= hopper payout amount
61= 1 payout hopper only-no printer
81= 1 Coin acceptor ON
BV dip switch
DS2 = WBA=
5= ON
6=OFF
-
It has a printer. The owner prefers coin handling. Bill val is a wba.
Progressive shows a dollar amount.
-
So on the 11d-
All settings stay with preset except the 2, 7, and 78lo?
-
Progressive settings in 11d
2= 4 or 5 or 6 you will have to try each one
7= 1
78LO= 1
Coin handling
54= hopper payout amount
61= 1 payout hopper only-no printer
81= 1 Coin acceptor ON
BV dip switc
DS2 = WBA=
5= ON
6=OFF
I tried all of the progressive “2” settings as suggested.
Machine takes $, but will not play. Pseudocoin plays correctly.
Progressive reads C1
Not sure where to go from here.
-
Progressive will not work with C1 error on the Mikohn board. You have to program the Mikohn board. Leave the 11d progressive settings at default so you can operate the machine until you get the Mikohn programming resolved. Do a clear , and leave settings at default and try it.
-
I had my friend try the default settings.
Still accepts cash, but won’t play.
Progressive shows 00.
-
It shows credits when it accepts cash.? Are the buttons lit up? If it shows credits and you press the bet one credit and then press spin button or pull handle it does not work? Or when you press bet max button it does not spin? If buttons are not responding , check the button harness at the backplane.
-
It’s shows credits, but won’t allow play. Does not matter if bet one, max bet are pushed. They are not lit.
I’ll have him look at the button harness, but suspect the buttons are working as the set up procedure I used initially required buttons to be used.
Would it have anything to do with any other dip switches?
I only changed the clear switch as he said the machine was working before battery died.
I have a s6000 at home and can try a different board, but he lives 1.5 hrs away.
-
Door optics not working?
-
Is there a way to check this? It does switch to play mode after the 11 settings, otherwise would not take $.
-
Maybe the dips are set at high denom and you don't have enough money in it to play? Set for $5 and you put only a dollar in it. Needs more money.
-
Maybe the dips are set at high denom and you don't have enough money in it to play? Set for $5 and you put only a dollar in it. Needs more money.
It took a 20$. Really stumped. Seems like something stupid though.
He currently has it set up, took cash. Don’t know what else to suggest.
-
What are the #2 Dip settings on switches 1-4 set at ?
-
(https://i.imgur.com/Yd040Yh.jpg)
-
Looks correct for 25 cent. Try another MPU