New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: T on July 23, 2015, 06:46:58 PM
-
Ok, so I purchased 2 Player Tracking Panels & Brackets for my 2 Game King Cabinets. One is a 3902 Model the other is a 044 Model if that matters.
The player tracking panel is the correct size 12 + Inches. The Brackets they sent are 13 + inches and do not have the same cut-outs for the display number pad etc....
Are there special Brackets for this player Tracking Panel? I sure hope so as the ones I purchased and the ones removed form machines will not work that I can see (cut outs are different also). I hope It is so simple I get to feel foolish :fryingpan:
I have included a couple of photos. Hope they help. Any advise or help I do appreciate. Can't wait to feel foolish as most of this stuff looks more difficult that it is. :duh:
-
There are variations to those panels. Not sure if it had to do with what year it was made or whatever, but unless I'm buying blank covers I try to buy the back bracket and cover panel as a set to avoid the mismatch you have. The price doesn't generally change much if you ask for the back bracket with it
-
There are variations to those panels. Not sure if it had to do with what year it was made or whatever, but unless I'm buying blank covers I try to buy the back bracket and cover panel as a set to avoid the mismatch you have. The price doesn't generally change much if you ask for the back bracket with it
Right, I purchased from Rudy's. I looked at the descriptions of the Panel & Bracket but not close enough at the length of the bracket that just won't work. I have been back to there web-site to look for proper bracket but can't see what I need. I will call or send message tomorrow. If someone has 2 sets that will work I am Interested. I don't think I will be able to resolve by going back to Rudy's.
-
I don't know crap about gamekings in general, but it seems like I read somewhere that they made the cabinets a little wider as the video screens got bigger. That might be your issue, or might not, but it may be a starting point to get the right part
-
Seems there is a coule/few different configurations in S2000 cabinets. I know it's a pain. We've gone to a generic cover plate (black or chrome/plastic), but you still need the correct mounting bracket.
Measure your opening for the bracket, but give a more definite number than 12+.
-
Seems there is a coule/few different configurations in S2000 cabinets. I know it's a pain. We've gone to a generic cover plate (black or chrome/plastic), but you still need the correct mounting bracket.
Measure your opening for the bracket, but give a more definite number than 12+.
Ok, just to clarify. I have 2 Game King 17" Round top Cabinets. The measurement from Printer to right side of cabinet is right at 12 & 13/16. The Tracking Player Panel Rudy's sent me fits. The Bracket is way off at 13 & 15/16 and not even close to lining up with the 2 mounting holes on cabinet. I hope may be U can help. I can send more pictures. The Tracking Player stuff I purchased at Rudy's lists player tracking panel as 12 & 1/2 inches. :yes: