**Video Poker, Keno, Slots, 21** Gaming machines > IGT I-Game and Game King

No video when changing a Game King from an 3902 to a 044.

<< < (2/4) > >>

Yoeddy1:
Make sure your clear chip and/or boot chip are not in backwards.  I did this yesterday when trying to clear and had all lights on the MPU with a blinking red.  No video either.  Check cable connections to the motherboard as well.

Mine do NOT have the Varta batteries.

Thanks,
Jason

bpracer:
Chips are in correctly.


--- Quote from: Yoeddy1 on September 28, 2015, 06:41:29 AM ---Make sure your clear chip and/or boot chip are not in backwards.  I did this yesterday when trying to clear and had all lights on the MPU with a blinking red.  No video either.  Check cable connections to the motherboard as well.

Mine do NOT have the Varta batteries.

Thanks,
Jason

--- End quote ---

bpracer:

--- Quote from: caffey on September 28, 2015, 05:15:57 AM ---If you have a LCD Ceronix monitor this was my
fix when I switched from 3902 to 044 board
and no video. It may work for other monitors as well.
     
            John

Mod Note: Dead link removed

--- End quote ---

John,  I can't find your post and I can't access your link.

Please post or email the details.

Thanks

rickhunter:
Did you test the green battery to see if you have good voltage?

caffey:
Bpracer sent you an email with a screen shot.
Which I tried but could not post here.

The file was sent to me by Ceronix.


       John

Navigation

[0] Message Index

[#] Next page

[*] Previous page