New Life Games LLC

Bill Validators, Currency Acceptors and Printers => MEI Mars Bill Validators => Topic started by: Aklarry on February 19, 2020, 02:55:35 PM

Title: MEI Bill Heads
Post by: Aklarry on February 19, 2020, 02:55:35 PM

I believe that the bill head for IGT is SC6602 and SC6607 for Bally but I can't find anything saying what the head is for Williams. Can anyone let me know if I'm correct on the two above and what I need for Williams it would be appreciated.
Thank you
Alaska Larry

Title: Re: MEI Bill Heads
Post by: wizeone on February 19, 2020, 02:59:20 PM

6602 is igt.  6607 is suposed to be bally, williams, aristo.  just have to have it programmed correctly or have the right eprom installed, depending if its eprom or software setup.




(side note 6602 and 6607 are the same in terms of hardware, so if its software based you can flash the software on either one)

Title: Re: MEI Bill Heads
Post by: Aklarry on February 19, 2020, 05:51:18 PM

So how in the world do you determine which one of the dozens on eBay will work on your Williams games?

Title: Re: MEI Bill Heads
Post by: wizeone on February 19, 2020, 09:38:49 PM

i would first check with members here about getting one that is programmed for williams..(if i recall right there was a new post in the for sale section selling heads already programmed)
http://newlifegames.com/nlg/index.php?topic=27362.0 (http://newlifegames.com/nlg/index.php?topic=27362.0)  doesnt list williams though.. might try reaching out to them and see.

Title: Re: MEI Bill Heads
Post by: Ash100 on May 26, 2020, 05:04:04 PM

Bally and WMS use the same Firmware.


ID003 is correct for both.


Curtis ash100