New Life Games LLC
**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: rta76 on October 13, 2021, 02:05:52 PM
-
I picked up this non working machine awhile back but still have had no luck identifying it. It is a 4 reel, 5 cent, 3 coin payout with no obvious label on the side for the MFG. It shows a Ser# SC1-1231 and model #HTC-0184, which have been no help. In front of the reels shows 1312 which I haven't been able to find out anything. In front of the hopper it has 752A, It looks like it may be from Bally but still have not been able to identify it. It also appears to need a power supply but have had no luck finding that either. Any help would be much appreciated.
Thank you,
Robert
-
Proof is in the puddin.....and your right the tag on the side doesn't say much.
Even when it does, a number of early slots went through field upgrades and morphed into different beasts.
A pic of the front of the machine, inside, does it have a removeable MPU ? if so get us a pic of that.
I see that you have one pic up on NLG but if you run into picture size problems, take it with your cell camera, email it to yourself with the option to reduce size and then post them.
-
Thank you for your reply. I took some more pics, so maybe this will help.......
-
I updated photos on the original post. Hope this will help identifying this.
Thank You, Robert
-
Did you find any other information? It resembles a Bally, other than it doesn't have the "Press button for change or service" button on the left of the panel.
I moved this to Other Slot Machines topic. It may get more attention there. :yes:
-
Thanks for your input. I still haven't found anything on this machine. I just posted a couple more pictures on the original post regarding the power supply. Not sure where to look anymore?????????????????
-
My guess would be that it,s a bally made overseas or made specifically for the foreign market.
-
I also thought maybe overseas or a military slot. It has a sound chip which I've heard many times and on the hopper is 752A 5 cent which it probably is but can not find any manual that depicts it or that it is even made from the Bally Corporation. Now the transformer is buzzing and will just blow a fuze due to an open diode from GE which I have also been unable to find. I am sure the one I have is outdated so cannot find a replacement for it. It is a stud diode with the markings of GE 001-25105 79 and 75138. Its the orange line 50 volt on this machine. Any help would be appreciated, Thank You.......