New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Madmike on August 12, 2022, 06:57:48 PM
-
I am having a problem cleaning a 61 code on a igt hot peppers machine. Any help would be very much appreciated!! Bad week for machines in my game room i guess
-
Ok so update….. I was able to pull the CMOS chip for the 15 secs and i now am passed the 61 code. I am now stuck on the 61-1 code as it wont clear when i turn the reset key. I know the switch is good cause it will go into settings mode?? But i did notice this missing and wonder if it has something to do with the new problem.
-
Ok new update as i cant stop fiddling with it…. I put on a optic that was missing (wich i need to buy if anyone has a extra one) and that got me out of the 61-1 code but put me back into the 61 code. I can not get past the 61 code now. Any help would be appreciated!
-
If the CMOS trick didn't work, sometimes you can change to another compatible SP chip and get it to clear. Other than that you would need to use a clear chip (IVC123) to get out of the 61 loop. I looked for a cabinet optic but I only have a few with broken wires. I can send you a clear chip if needed. PM if interested.
https://newlifegames.com/nlg/index.php?topic=16134.0
-
Wich one is the SP chip by chance?? Then i can see if i have one that matches. Sorry for all the dumb questions.
-
SP chip is the game chip. You do not want one that matches. If machine has a SP731 in it now try switching to a SP1271.
-
Oh ok. Will that affect the machine i pull it from?
-
Oh ok. Will that affect the machine i pull it from?
No.
-
You weren't very clear in your Reply #1.
Did you CLOSE THE DOOR before turning the Jackpot/Reset key?
-
Im sorry. Yes i did close the door before turning key.
-
I have many sets of optics available, let me know if you still need some.
Jim
-
RB was able to sell me some and a few chips to help clear the code hopefully. I do need some buttons if you have any of those?
-
Update on machine. I received the chips and happy to report the machine is up and running great!! I could use some lights for the buttons if anyone has some for sale?? I do thank you all with all for your input couldn’t have done it with out all of you.