New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: PhillyArcade on August 16, 2022, 01:54:18 PM

Title: Schematic needed for an S plus reel machine for mother board
Post by: PhillyArcade on August 16, 2022, 01:54:18 PM

Howdy, I have an S plus that the battery blew up a little bit. I got this all cleaned up but A few traces were broke that I fixed but I want to confirm voltages before I put the boards back in. I've replaced the molex connector on the pcb and harness with a new one but I really want to confirm the voltages there before I plug it back in. Thanks!

Title: Re: Schematic needed for an S plus reel machine for mother board
Post by: PhillyArcade on August 16, 2022, 01:55:14 PM

Here is a picture of the connector I'm looking for the voltage on... It would be the connector on J8