New Life Games LLC

**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: David Walz on September 10, 2023, 03:50:21 PM

Title: Hopper Bowl Large Coin Shim
Post by: David Walz on September 10, 2023, 03:50:21 PM

Hopper Bowl Large Coin Shim.
K-LAR sent me this with the hopper, and I have no idea where this goes on the hopper. Can someone please post a picture of where it goes. None of my Bally books shows this part.

Thanks

Title: Re: Hopper Bowl Large Coin Shim
Post by: Stayouttadabunker on September 11, 2023, 05:15:25 AM

Pull the bowl off...it goes along the into the slot along the edge.

Title: Re: Hopper Bowl Large Coin Shim
Post by: David Walz on September 11, 2023, 05:31:39 AM

Quote from: Stayouttadabunker on September 11, 2023, 05:15:25 AM

Pull the bowl off...it goes along the into the slot along the edge.

Thanks

Title: Re: Hopper Bowl Large Coin Shim
Post by: David Walz on September 11, 2023, 11:14:30 AM

:Coffee_Buzz: Need more coffe. 


I've taken this **** apart and I still am trying to figure it out.  :banghead:


Where's Wolftalk hiding at?  :EmoticonHelp4:   :EmoticonHelp4:

Title: Re: Hopper Bowl Large Coin Shim
Post by: wolftalk on September 14, 2023, 06:23:24 PM

dunno ... I don't remember seeing part before - probably because I've never taken apart a $1 hopper.

Title: Re: Hopper Bowl Large Coin Shim
Post by: David Walz on September 14, 2023, 07:35:47 PM

Quote from: wolftalk on September 14, 2023, 06:23:24 PM

dunno ... I don't remember seeing part before - probably because I've never taken apart a $1 hopper.

I honestly sat down and tried to figure out how to stuff it into the hopper and came up empty.
I guess we're charting new territory with this machine.  :woot:

Title: Re: Hopper Bowl Large Coin Shim
Post by: DavidLee on September 16, 2023, 05:22:34 PM

Haven’t noticed that part in any machine I’ve worked on.
Possibly sandwiched between two flat parts in a later E machine.
Or just got into the box mistakenly.

Title: Re: Hopper Bowl Large Coin Shim
Post by: David Walz on September 17, 2023, 07:59:56 AM

Quote from: DavidLee on September 16, 2023, 05:22:34 PM

Haven’t noticed that part in any machine I’ve worked on.
Possibly sandwiched between two flat parts in a later E machine.
Or just got into the box mistakenly.

A+