Bill Validators, Currency Acceptors and Printers > Printers - ALL
Paycheck 3 (Nanoptix) on Bally Alpha
(1/1)
aldorinc:
Hey All!
Thanks to all of the information on this site, my Bally Alpha (S9000) is up and running! The last piece to fix is the printer. It came with a PayCheck 3 from Nanoptix installed. The printer turns on and will print a test voucher (see attached photos), but after hours of scouring the internet I'm unable to find anything on using this with a Bally Alpha.
I've tried setting up under "Seiko PSA-66t", as well as "Ithica 850". There are 4EA dip switches on the printer as well, and I've tried a few different Bally ones but no success yet. After hitting set, there is no response from the printer from hitting "print test voucher" and I get a "voucher printer com error" message.
Worst case I can buy a Gen2 to get it printing, but wanted to see if anybody had used one of these and if a certain combination of settings would work.
:thank_you:
Thanks for the help!
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |