Conversion help questions

[Samm329]

So I picked up the Munsters glass game chips and all from a distributor. But my question is, does anyone know how I can tell which reel each strip goes on, also it came with an extra chip “ dspl0002” I would assume that would go in the bare socket beside the version chip?


If someone would be willing to let me bounce probably super basic questions off them, I’m open to calling or texting.


Thanks
Sam

[Samm329]

Ok so I got the reels in order, but now I found another issue. The reels are about 1/8th of an inch wider than the ones coming off the game, could I cut them to fit?

[qbert]

You really need to get the wider reels and associated reel tray for your machine. This will allow the game specific reel glass to line up properly.

You only need the DSP chip if you are using an enhanced MPU with a legacy adaptor.
You have a 500 series board so it is not needed.

Strips should install from low numbers to high left to right.