Author Topic: Need help with clear chip (Read 3337 times)

BKOCH · « **on:** July 28, 2019, 11:32:32 AM »

I know I should remember this but I don't. I just changed the battery in my reel touch and I cant for the life of me remember what clear chip to use with the reel touch.

HELP

thanks

qbert · « **Reply #1 on:** July 28, 2019, 11:58:32 AM »

If you just changed the battery all you should have to do is turn the jackpot key a few times.
Probably don't need clear just key if you already tried one.
If it's a 1270 board clear 224, key 45 will also work for
500 series.
500 series also can use clear 97

BKOCH · « **Reply #2 on:** July 28, 2019, 12:18:03 PM »

Thanks,

its a 1270 and I have a 224

BKOCH · « **Reply #3 on:** July 28, 2019, 12:37:43 PM »

I keep getting a ram error code

, its been a long time since I worked on these machines, what is the clear chip procedure? thanks again.

A bit of todays history.

1 replaced the old style board and motherboard with the replaceable battery type 1270. The first one I tried, out my box of parts, kept saying netplex link down. swapped boards with another and the new error code is Ram error.

qbert · « **Reply #4 on:** July 28, 2019, 01:02:55 PM »

Turn the jackpot key you will get three errors keep turning the jackpot key.

BKOCH · « **Reply #5 on:** July 28, 2019, 01:15:20 PM »

What is the process to clear and key chip a new setup. I can't seem to find my book of notes I had for these machines since my move.

I'm starting to feel old.

I seem to have developed CRS "Can't remember S--t"

qbert · « **Reply #6 on:** July 28, 2019, 01:45:00 PM »

http://newlifegames.com/nlg/index.php?topic=323.0

Just remember after you put the game chip back in you must wait until the top box boots before the reels will spin and you can continue with set up.

BKOCH · « **Reply #7 on:** July 28, 2019, 02:32:16 PM »

Ok its all starting to come back.

New issue is its asking for E2 ram clear to change denomination. What is the E2 ram clear? I thought the clear and key chip performs this task.

qbert · « **Reply #8 on:** July 28, 2019, 04:28:49 PM »

The 224 is the clear. You must set the denomination after the clear. If you did not do that after the clear that is why you are getting this message.

BKOCH · « **Reply #9 on:** July 28, 2019, 06:33:32 PM »

I know this is a stupid question but is this the process I should use

1 install clear
2 install key
3 install game
4 wait for top screen
5 change denom
6 change other info

thank you so much

qbert · « **Reply #10 on:** July 28, 2019, 06:58:21 PM »

With a reel Touch you probably want to install the clear
Then install the game chip let the top box boot then set the denomination and machine type then save. Then do the key process the same way. You can't do the clear and key at the same time on Reel Touch.

BKOCH · « **Reply #11 on:** July 29, 2019, 09:11:58 AM »

I have tried both ways. just a clear, then boot, then trying to change denomination, then key chip. also tried clearing and key chip. both do not allow me to change the denomination, also this machine has multi denomination touch screen and I cant remember how to access this setup.

The machine is working with the single denomination set up

Should I try a different clear and key chip? I have key 17 22 31 45 I also have clear 97 and 224

Any suggestions?

qbert · « **Reply #12 on:** July 29, 2019, 09:30:20 AM »

224 and 45 are the latest.
Key the machine then in order to set the denomination you must enable the game select 7.1.2 you must set that first then you will be able to set the denomination.
Don't forget to enable the buttons also.

BKOCH · « **Reply #13 on:** July 29, 2019, 10:06:49 AM »

Ok, making more headway, this time the denomination is cleared, however in the key chip setup under game select there is only one choice for the game. under 7 segment there is only 2 options 5.5.2 and 6.6.3.

Under what key chip setting do I find the 7.1.2

Thanks again for this help.

BKOCH · « **Reply #14 on:** July 29, 2019, 01:41:30 PM »

As I said its been a wile since I did this, I see 7,1,2 is the game select. however there is only one game option showing. I seem to remember I had to go somewhere else to enable more than one game. then go back to choose the percentages for each game. is this correct? and if so where do go to enable more than one game?

qbert · « **Reply #15 on:** July 29, 2019, 03:32:04 PM »

After you key the game you should be able to navigate to 7.1.2 then change the disabled slots to game selects with the percentage you want. Use the service button to move cursor and cash out to select game. Hit max bet to save.
The 7.1.2 is the somewhere else you are thinking of.
Then you go back to 7.1.1.3 and 4 to pick player denomination and touch panel button designations.

BKOCH · « **Reply #16 on:** July 29, 2019, 08:10:34 PM »

Is it posable the version chip is incorrect, with version chip I have(vs011gx0) there is only one game. there are no other games to enable.

I have another reel touch same board 1270 with a different version chip in it (vs011nx5) this one allows for multi game.

The confusing part is this machine was working prior to the battery going dead and it was set up for multi game. the only change I made was changing the mother and game board to a 1270.

again thanks

qbert · « **Reply #17 on:** July 30, 2019, 04:21:39 AM »

No, the version chip on Reel Touch does not control multi play option like other S2000. The chipsets on Reel Touch are very specific and can not be changed.
What happened when you did the key process? On the 7.1.2 couldn't you tab to the disabled lines with the service button and enable them with the cash out? Don't forget to save with the max bet button.

RB · « **Reply #18 on:** July 30, 2019, 06:56:58 AM »

What SG chips are you using? Certain ones do support a multi denom version chip.

qbert · « **Reply #19 on:** July 30, 2019, 07:32:41 AM »

RB same answer as version chip. The SGs that are used are specific to the game on Reel Touch and to my knowledge all support multi denom.
He is missing a step when he is keying the machine I am sure.

News:

NLG Site Navigation Menu

Author Topic: Need help with clear chip (Read 3337 times)