Author Topic: Denver Duck...Com Link Failure (Read 10968 times)

qbert · « **Reply #20 on:** June 25, 2020, 04:15:03 AM »

That's harddrive corruption failure.
Need to know if it is bios 1 or 2.
Initial splash screen a red white and blue finger or the green and yellow energy star?

jake511511 · « **Reply #21 on:** June 25, 2020, 11:39:34 AM »

this is what it shows now

jake511511 · « **Reply #22 on:** June 25, 2020, 11:47:38 AM »

This is on the right top side

jake511511 · « **Reply #23 on:** June 25, 2020, 11:49:26 AM »

This is on top right screen

jake511511 · « **Reply #24 on:** June 25, 2020, 11:50:56 AM »

This is on top right top

jake511511 · « **Reply #25 on:** June 28, 2020, 01:33:45 PM »

heres a pic of the board

qbert · « **Reply #26 on:** June 28, 2020, 02:05:42 PM »

The SB label has to be wrong. SB000523 is a Larry Lobster SB.
OK what is the max credits playable on your machine?

The laneman · « **Reply #27 on:** June 28, 2020, 02:15:10 PM »

It was playing as a Denver Duck.
It has the multi game hard drive in it if that matters

qbert · « **Reply #28 on:** June 28, 2020, 02:44:40 PM »

No HD doesn't matter the SB controls which game plays off the HD.
I can tell you what the chip is if I know the max credits playable.

Dirtguy · « **Reply #29 on:** June 28, 2020, 04:04:57 PM »

Guys
I have a Denver Duck with SB000523, 75credit. Its playing with SG000290 game chips. Not a multi HD.

qbert · « **Reply #30 on:** June 28, 2020, 05:11:18 PM »

My bad you are correct SB000523 is a 75 credit Duck.
The problem is the SG number
I believe that you have SG000536.
I have no PSR for SG000523.
Chances are if you were running a multi drive you were using SG000536.

The laneman · « **Reply #31 on:** June 28, 2020, 05:20:17 PM »

It is 536

cowboygames · « **Reply #32 on:** June 28, 2020, 05:28:04 PM »

It was working before you plugged the other machine in. Take the cmos battery out of the topbox computer for a few minutes to reset the ram and put the battery back in, replace it if needed. Do standard topbox reset with a ps2 keyboard

jake511511 · « **Reply #33 on:** July 01, 2020, 07:30:32 PM »

This is whats on the screen now

jake511511 · « **Reply #34 on:** July 01, 2020, 07:33:33 PM »

This picture

cowboygames · « **Reply #35 on:** July 01, 2020, 07:46:32 PM »

Did you use a PS2 keyboard to enter current default usage? How was the battery?

qbert · « **Reply #36 on:** July 01, 2020, 07:57:17 PM »

Are you sure you plugged the hard drive in correctly?
It's not identified.
You must be really careful if you shift the plug incorrectly really bad things happen to the harness.
See attached from the left there should be 4 open pins(2 rows of 2) then starting from the left after the open pins the plug should have the red wire on the left top of drive.

qbert · « **Reply #37 on:** July 01, 2020, 08:01:01 PM »

I can't stress enough be careful with this plug.
I usually plug the hard drive in then I mount it to the case so you can be sure it is plugged in correctly.
Also as cowboy said you must find an old computer keyboard with the small purple PS2 plug. Plug it into the top box and turn on the machine. Keep pressing the delete key until the bios screen appears find the " Load optimized defaults " and press that button then save and exit. Turn off the machine and unplug the keyboard. Restart and you should a least get back to where you were before harddrive went out

jake511511 · « **Reply #38 on:** July 03, 2020, 12:51:13 PM »

Thank you all for the help....Now i need to find A old key board

cowboygames · « **Reply #39 on:** July 03, 2020, 01:31:12 PM »

Try the Goodwill or any second hand store

News:

NLG Site Navigation Menu

Author Topic: Denver Duck...Com Link Failure (Read 10968 times)