New Life Games LLC

**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: startek2 on December 01, 2023, 02:06:36 PM

Title: wms 400 topcat still dead
Post by: startek2 on December 01, 2023, 02:06:36 PM
replaced the boards, no good.  checked the power it is all there except for the ~5V, there is apparantly a sense circuit that has an ac input of 5VAC and the out put is nothing....but maybe it is supposed to be dead as all the power is there?  i have all the other voltages////the 5v sense circuit is an opto that outputs to a transistor that i think pulls down to give 5V?? but it is not energized.........any ideas?  also i have a couple of stampede machines in lockup i wonder if they have the same power supply? these have dotmation....??help!
Title: Re: wms 400 topcat still dead
Post by: dragster73 on December 01, 2023, 02:09:52 PM
Are all the LED's lit on he I/O board?
Title: Re: wms 400 topcat still dead
Post by: startek2 on December 01, 2023, 02:40:43 PM
Yes all the leds are lit including a slow dash on the left one indicating an error. I verified all the voltages except the alt 5V is not there but I’m thinking it shouldn’t be
Title: Re: wms 400 topcat still dead
Post by: Sunrise Side on December 01, 2023, 03:46:13 PM
The far left LED should be off. If not you have a bad component on the large distribution board inside the power supply.  Most likely a cap. The smaller one.
SimplePortal 2.3.5 © 2008-2012, SimplePortal