New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: greenie17 on November 17, 2023, 02:29:46 PM

Title: OK I give up... Anyone know how to make this thing coinless?
Post by: greenie17 on November 17, 2023, 02:29:46 PM

Hi everyone.   I am new and am at a dead end.   I have an old game king video slot machine.   I have had it for a few years.   

There is no coins or printer.    I would basically hit the service button on it to add 10,000 credits and play for free. 
Everything worked perfectly until this week, but just a little background.

I had the power supply go out last year and replaced it myself with no issues.
Last week I had an error that my board battery was dead.  So I ordered a new CR2354 battery and installed that.
The error went away, but I lost all my settings.  So in looking at how to get the machine back up I figured out how to get into the settings and turn off the hopper and the printer and all the tilts.
The machine finally was working.   But now I have no credits and the service button no longer adds credits.   I have tried everything so far but to no avail.  I can't get any credits so the machine is basically an $1,800 door stop for the moment.   

Does anyone know how to get this thing working as it was with the service button adding in credits?   I am holping it's just a setting somewhere or some button or key press that will get this thing back to how it once was.

Thanks in advance.

Mark

Title: Re: OK I give up... Anyone know how to make this thing coinless?
Post by: rickhunter on November 17, 2023, 02:40:54 PM

You need a key chip and setup SAS for TITO with legacy bonus enabled.  There are various threads here and videos on youtube on how to setup TITO for IGT/Gamekings.

Title: Re: OK I give up... Anyone know how to make this thing coinless?
Post by: Tilt on November 17, 2023, 02:45:29 PM

 :NLG_WELCOME:

Which MPU board do you have, 044 or 3902?  If you're not sure post a picture of it and we'll tell you.  You just need to setup the Comm channel and SAS settings again, but you'll need a keychip to make some of the changes.  Normally the service button wouldn't add credits, but since yours did that tells us that you have a TITO board installed in it.  With that you can print and validate your own tickets if you chose to or just use the service button as you have in the past.

Title: Re: OK I give up... Anyone know how to make this thing coinless?
Post by: greenie17 on November 17, 2023, 03:10:38 PM

WOOT!!!!

So looking thru https://newlifegames.com/nlg/index.php?topic=4402.msg23172 I was able to get into the settings for the TITO and set it up and this fixed the issue.   Thank you guys so much for the help!!!!    You guys rock!!!

Title: Re: OK I give up... Anyone know how to make this thing coinless?
Post by: Tilt on November 17, 2023, 03:18:34 PM

Glad you were able to get it working again  :applause: